How to Repair IMEI Number Baseband on Infinix Smart 3 Plus

IMEI Baseband Repairing on Infinix Smart 3 Plus:

Step by Step Guide to Repair IMEI Number , baseband on Infinix Smart 3 Plus, if You own Infinix Smart 3 Plus Smartphone having No IMEI issue then You can Repair it’s IMEI, baseband & Mac address etc by Following Below Instructions.

Infinix Smart 3 Plus Run on android 9.0 & it is Powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that accepts Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.

The Device Come With 2GB of RAM and 32GB of Internal Storage Can be Expandable via SD card. In Camera Department it Come With 13+2MP rear Camera With 8MP front Shooter.

Note-

  • First Make a Complete backup of Your Phone.
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Ensure that Your Device at-least 50% Charge to Prevent accidental Shut down during the flashing Process.

Download:

  • Sn Writer tools Latest Here
  • database Files From Firmware: Infinix Smart 3 Plus
  • Make Sure You have Same Firmware Installed For better Result’s

Steps to Repair IMEI Number on Infinix Smart 3 Plus:

  • Download and Extract the SN Write tool to your computer
  • Now open the file SN Writer.exe. From the Next Screen Click on COM Port and Select USB COM
  • Click “Target Type” and select “Smartphone” (only if you want to Write IMEI on Sour Smartphone.
  • Click the “System Configuration” button.
  • From the System Config Screen, select IMEI, BT address and Wifi address in the Write option.
  • If You have Dual SIM Device Check Dual IMEI Option For WIFI, Mac & BT address Check and Write…

  • in the “Database File” Section, add “MD1_DB” and “AP_DB” (both files are supplied with the firmware of Your device/Download From above). Then Click on Save and then Click Start.

  • Now in the “Scan Data” section, Enter IMEI_1 and IMEI_2, Bluetooth address, Wifi address and click “OK”.

  • Connect Your Switched Off Phone to PC with usb, (again Select usb COM Port if Not Selected) Click Start
  • wait until Success. Done.