How to Install Android 9.0 Pie update on Samsung SM-J415G

Download J415GUBU2BSD6 Pie update for Samsung SM-J415G:

Download & Install Official Android 9.0 Pie update on Samsung SM-J415G, Here we Share latest J415GUBU2BSD6 Firmware update for Samsung SM-J415G Which Will update Your Phone to Latest Android 9.0 OS, J415GUBU2BSD6 update for Samsung SM-J415G available via OTA You Can Check it on Settings/about_Phone/update Section, If You have not yet Receive then you can Manually update it by Following the Below Instructions.

Samsung SM-J415G Run on android 8.1 OS Which is Powered by a QCOM SD 425 Processor. it is a Dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options Include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G and 4G.

Samsung SM-J415G  Come with 2/3GB of RAM and 16/32GB of Storage can be expandable via SD card. it has 13MP Primary Camera on the back and a 5MP Secondary Sendor on the Front for Selfies.

Note-

1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Must Require:

1. backup NVRAM
2. Create a nandroid backup
3. backup Your Personal data

Firmware information:

Product name: Samsung SM-J415G
Type: Full ROM
Size: 2GB
SoC: QCOM SD 425
Os: Android 9.0
Password: Null
Root access: Not
Gapps: unknown
Regions: Mexico & Brazil
PDA: J415GUBU2BSD6

Download :

  • Firmware J415GUBU2BSD6 Mexico & brazil: Download

Flash Tools:

Driver: 

How to Install Android 9.0 Pie on on Samsung SM-J415G:

1) Download tools and Combination ROM From above. Then Extract odin and ROM File.

2) Install Samsung Driver on PC. Run Odin.exe From tool Folder.

3) Now Reboot Phone to Download Mod and Connect to PC with usb

4) You can see added msg. Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“ Make sure re-partition is Not checked.

5) Now Extract & Load Full Firmware under AP, BL, CP and HOME_CSC Section and Click Start/Download

6 ) Wait For Success/ Done.

have any issue Here is the Detailed Guide With images.

  • For Flash tools follow This Guide: Here
  • For OTA Follow this Guide : Here
Read also:
  1. How to unlock Bootloader
  2. How to Repair IMEI Number

So this is a Complete Guide to Download Firmware and Flash This Device. if You have any question Let Me Know via Comment.


LEAVE A REPLY

Please enter your comment!
Please enter your name here

1 × three =