How to Install twrp Recovery Root Chuwi Hi9 Pro

Root twrp Chuwi Hi9 Pro-

twrp Recovery now Released For the Chuwi Hi9 Pro and Finally We have A Solution to Root it. So that today we will talk about this topic. In the topic We are going to Share a Complete Guide to Root Chuwi Hi9 Pro by using the SuperSU and twrp Recovery.

Many peoples use Chuwi Hi9 Pro but few people know about rooting the phone . So the article For that Whom does Not Know How to Root. Root is Not Necessary for all Peoples but it Require to achieve Some advance features of the Device .

by Rooting the Phone You can improve Your phone’s performance even better. but it also Dangerous for  Newby. You can get the full information about ” Android root ” from Here. We can root our phone in two ways First one using the Computer and other one Without using the Computer. but The Chuwi Hi9 Pro is Not Rootable without a Computer So You Must have a PC to Root it. Let’s get Start The process.

Note-

1. This Guide is Work only on Listed Device. So please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data, So Must create a backup of your Personal data before Flashing,
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Shut Down.
5. Follow all steps correctly otherwise it Will cause bootloop.

Features of TWRP Recovery:

  • You can flash Custom ROM on
  • You can flash modding zip files to customize your phone
  • Easy to flash and use Xposed Modules using TWRP
  • Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
  • You can install Magisk on
  • You can always take FULL NANDROID Backup in case of any modding or flashing.
  • Easy access to restore the Nandroid Backup.
  • You can flash the image file using TWRP Recovery
  • Easy to remove all bloatware using TWRP Recovery
  • To underclock and overclock.
  • You can clean Wipe, Cache, and Data.
Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Download-

File Name Download
twrp Recovery Chuwi Hi9 Pro Download
SuperSu/ Magisk Download
adb fastboot Driver Download
No-verity-opt-Encrypt Download
adb fastboot tools Download

Pre-Requirement’s:

  1. unlocked bootloader [use below Guide]
  2. PC and usb
  3. adb tools Setup, Download and extract in a folder.
  4. Move recovery File to adb folder [must rename it [recovery.img]
  5. Install adb fastboot Driver
  6. enable usb debugging and oem unlock

How to Install twrp Recovery on Chuwi Hi9 Pro-

Step 1. Download twrp Recovery From above and extract in adb Folder [also Download and  extract From above]

Step 2. Download & Install adb fastboot Driver On Your PC

Step 3. then follow Bellow Instructions,

Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging and Oem Unlock.

Step 5. Now Install Correct adb and fastboot Driver on Your PC[Skip if Installed], Go to adb folder[Extracted in above step] Connect Device to PC using usb open CMD Here and type command .

adb reboot bootloader

Step 6. Your Device Booted in Fastboot Mod To check Device connectivity type

fastboot devices

Step 7. Unlock bootloader:

fastboot oem unlock
fastboot flashing unlock

Step 8. Rename twrp to recovery.img and Move it in adb Folder(if Done skip it),

Flash twrp on Chuwi Hi9 Pro using below Code:

fastboot flash recovery recovery.img

Reboot Chuwi Hi9 Pro to twrp using This Code:

fastboot boot recovery.img

Step 9. Recovery is Now Flashed [installed] Your Phone also booted in twrp Make a System Reboot. or Flash zip if you Want.
Step 10. Done

How to Root Chuwi Hi9 Pro-

Step 1. Download Magisk/superSu From above and Save it to Device storage [internatl/ external].
Step 2. Switch of phone and Press power and volume up button to boot Device into twrp [Installed in above Step] or use code
adb reboot recovery
Step 3. In the twrp Go to backup tab and Create a nandroid backup. Don’t forgot to include NVRAM or imei aka EFS.
Step 4. Go to wipe tab and Do a factory Reset.only Do a factory Reset Do’t include other partition’s.
Step 5. Go to Install tab and Locate Download SuperSu.zip and confirm Install, wait For Success Done.
Step 6: again to Install tab locate No verity opt encrypt.zip and Confirm Install. Done Reboot system Now.