How to Install official Firmware on OPPO F5 Youth

Official Firmware OPPO F5 Youth:

In Some cases We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your OPPO F5 Youth lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your OPPO F5 Youth.

Some other useful articles-

1, How to Flash Official Firmware on Vivo With QCOM-DLoader.
2. How to Disbale Boot verification using No verity Disbaler.
3. How to Repair IMEI Number on Qualcomm Phone [Easy Method]

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • First Make a complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Downloads Links:

EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)

Flash tools:

usb Driver: 

How to Flash Via SP Flash tools (No Auth):

  • unpack downloaded Firmware using this tool
  • Install Mediatek Vcom driver on Your computer
  • Disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • on SP flash tool Setup Connection Like below Images
  • Click Options > Options > connection and make the settings as in the screenshot (UART connection mode)

  • Select Download only. Click Download & Connect Your switched off Phone to computer by pressing volume up and down key (make sure all driver are installed, if no usb VCOM device then you have to do test point)

  • You can see Flashing Process On Screen. after Complete unplug & switch it on

How to Flash/unbrick Via Oppo Download tool:

  • Extract ROM File & Download tool in same folder
  • Now Install VCOM driver on PC
  • connect Phone to computer in this way USB+ Volume up+ Volume down key (make sure all driver are installed, if No USB VCOM device then you have to do test point)
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Related: