How to Install official Firmware on Pulada S

Download Firmware Pulada S-

official Stock ROM firmware for Pulada S is Here, in the article you will Learn how to Install stock ROM/flash file on Pulada S.  if you own a Pulada S smartphone and want to Install Stock Rom/ firmware on it to unbrick or fix bootloop issue then you are on correct Place, here i will Explain a Complete and Step by Step guide to Install Stock Firmware on Pulada S.

The Pulada S is a Latest Smartphone which is Run on android 6.0 OS and Powered by a Mediatek MT6737T Processor, the Pulada S is a Dual sim Smartphone that accept 2 Regular SIM card, connectivity Option’s include 3G  4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo proximity Gravity etc.

Note-
1. This is a unique guide which is work on almost all Mediatek Devices,so follow this one for any Mediatek Device flashing.
2. Flashing The Rom by Sp flash tools will erase all your Data with official Rom, So create a backup of your personal data before Flashing, if possible.
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5.Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide before Doing anything.

Firmware Information-

Device Name Pulada S
OS Android 6.0
Chipset Mediatek MT6737T
language Multi Language
Root access Not Rooted
Gapps Included

Require tools and Files-

File Name  Download
SP Flash tools Download
V-COM Driver [Must Require] Download
Stock ROM/Firmware Pulada S https://www.needrom.com/download/pulada-s/
Backup NVRAM [Must Require] Go–Here

How to Install Stock ROM on Pulada S-

Step 1- First of All Download SP flash tools and Extract Inside a Folder, you can Extract in C drive for batter work.

Step 2- Download and install Vcom Driver In your PC, This is a must requirement of Sp flash tools Flashing, without the Driver you can’t Flash the Device.

Step 3- after That Download official Firmware File, Select your Device From Drop Down menu and Download Rom.

Step 4- Extract Download Rom file Inside a Folder, you can Extract on the Desktop for batter navigations.

Step 5- Go to Sp flash tools Folder and Run’Flash tools.exe’ File.

Step 6- Navigate the Download tab and then Click over Load Scatter File, a pop up is now opened, navigate Scatter File From Downloaded Rom folder and Click OK.

Step 7- Check everything,[ in custom Recovery case Check Recovery only, and then hit over the Download.
Step 8- As soon as connect your Switched off phone to your PC via usb cable, and wait for Success, after Some time a green circle is appear.Done.

So This is a Complete Guide to Install Stock Rom on Pulada S have any question Use Comment box.